Polycom VSX Series manual Setting Description Monitor, Output upon, Screen Saver, Activation

Customizing the VSX System

Setting	Description
Monitor 1	Specifies the monitor’s aspect ratio:
VSX 5000	• 4:3 — Select if you are using a regular TV monitor.
VSX 6000	• 16:9 — Select if you are using a wide-screen monitor.
VSX 6000A
	Specifies the monitor’s format:
VSX 7000
	• S-Video— Select if the main monitor is connected to a
VSX 7000s
VSX 7000e	VSX 8000 system using an S-Video cable.
VSX 8000	• Composite — Select if the main monitor is connected to a
	VSX 8000 system using a composite video cable and S-Video
	to RCA adapter.
	• VGA — Select if you are using a VGA monitor as the primary
	display device for a VSX 5000, VSX 6000A, VSX 7000s,
	VSX 7000e, or VSX 8000. If you select VGA, your VGA
	monitor must be set to SVGA (800 x 600) or XGA (1024 x 768)
	at 60 Hz, and Monitor 2 is disabled.
	Note: If you select 16:9, you will also need to set up the monitor
	for full-screen display. In the monitor’s setup menu, choose the
	setting that stretches the picture uniformly without clipping the
	edges, which is usually called Full, Wide screen, or 16x9.
	Use this setting:	Not this setting:

Output upon	Specifies the screen saver output for Monitor 1:
Screen Saver	Specifies whether black video or no signal is sent to the monitor
Activation
	when the system goes to sleep and the screen saver activates.
VSX 5000
	Select Black if you want to display screen saver text or a screen
VSX 6000
	saver news feed. This is the recommended setting to prevent
VSX 6000A
	burn-in for TV monitors.
VSX 7000
	Select No Signal if you want the display to react as if it is not
VSX 7000s
VSX 7000e	connected when the system goes to sleep. This is the
	recommended setting for VGA monitors and projectors.
VSX 8000

4 - 7