Polycom VSX Series manual Configuring Remote Control Behavior

Customizing the VSX System

Configuring Remote Control Behavior

You can customize the behavior of the remote control to support the users’ environment.

To configure remote control behavior:

1.Go to System > Admin Settings > General Settings > System Settings > Remote Control.

2.Configure these settings:

Setting	Description
Keypad Audio	Specifies whether to play a voice confirmation of numbers
Confirmation	selected with the remote control.
Remote Control	Specifies whether pressing remote control keypad buttons
Keypad	moves the camera to presets or generates DTMF tones. If
	this is set to Presets, users can generate DTMF tones by
	pressing	on the remote control while on a video screen.
Snap Button	Specifies alternative uses for the		Snap button on the
Option	remote control. Choose from Calendar, Recent Calls,
	System Info, Call Statistics, or Off.
Chinese Virtual	Specifies the type of onscreen keyboard to display for
Keyboard	Chinese.
	• Computer—Sets the Chinese Virtual Keyboard to an
	English computer keyboard without number keys.
	• Cell—Sets the Chinese Virtual Keyboard to a cell phone
	keypad.
Use Non-Polycom	Configures the system to accept input from a
Remote	programmable, non-Polycom remote control. In most cases
	the Polycom remote works as designed, even when this
	feature is enabled. However, try disabling this feature if you
	experience difficulty with the Polycom remote. For more
	information about VSX system IR codes, refer to the
	Integrator Reference Manual for the VSX Series.

4 - 55