Polycom VSX Series manual Go to this screen Configure these settings Cameras, Camera Settings

Administrator’s Guide for the VSX Series

To configure a second camera:

Go to this screen:	Configure these settings:
Cameras	•	Designate this as the Primary Camera, if
System > Admin Settings >		desired.
Cameras	•	Set Camera Direction to specify which way
		the camera moves when you control it with
		the remote control. (VSX 5000, VSX 6000,
		VSX 6000A, VSX 7000, VSX 7000s,
		VSX 7000e, VSX 8000)
Camera Settings	1.	Name the camera.
System > Admin Settings >	2.	Select a camera icon.
Cameras > Next	3.	If you used an RCA to mini-DIN adapter to
		connect the camera cable, change the Video
		Format to Composite. (VSX 5000,
		VSX 7000, VSX 7000s, VSX 7000e,
		VSX 8000)
Video Quality	Set the video quality (Motion for people video or
System > Admin Settings >	Sharpness for still images).
Cameras > Next > Next
Serial Port	If it is a PTZ camera:
VSX 7000,VSX 7000s,	1.	Set the RS-232 Mode to Sony PTZ camera
VSX 7000e, VSX 8000		control.
System > Admin Settings >	2.	Specify which camera is associated with this
General Settings > Serial Port		port.

Configuring Automatic Camera Tracking

You can configure a VSX 7000e or VSX 8000 with a Polycom PowerCam Plus to track to the speaker’s voice or to camera presets. During a call, users can

press Auto on the remote control to toggle between Automatic Camera Tracking, Automatic Camera Tracking to Presets, and Automatic Camera Tracking Off.

When Automatic Camera Tracking to Presets is enabled and no one speaks for 30 seconds, the camera automatically moves to preset 0. When Automatic Camera Tracking is enabled and no one speaks for 30 seconds, the camera automatically moves to a position to include all of the people who have spoken.

If the camera consistently moves too far in one direction when tracking is enabled, follow the instructions on the Camera Calibration screen to calibrate the camera for better tracking.

4 - 4