Polycom VSX Series manual Connecting an ImageShare II to Component Systems

Setting Up Your System Hardware

The following diagram shows supported cable configurations for connecting a Visual Concert VSX with a SoundStation VTX 1000 conference phone.

VSX 5000

VSX 6000

VSX 6000A

VSX 7000

VSX 7000s

50 ft (15 m)

2457-20910-050 or 30 ft (9 m) 2457-20910-001

The ferrite bead must be at the end connected to the system.

10 ft (9 m)

2457-21624-001 or 3 ft (0.9 m) 2457-21625-001

The Visual Concert VSX and the SoundStation VTX 1000 must be connected in this order.

Connecting an ImageShare II to Component Systems

To show material from your computer, you may connect an ImageShare II unit to any component system in the VSX series. The ImageShare II gives you control over whether others can see what is displayed on your computer.

Refer to your system’s setup sheet for connection details.

Connecting Computers to Component Systems

You can connect your computer directly to a VSX 7000e or VSX 8000 system. When you do this, other call participants see everything that you see on your computer.

Refer to your system’s setup sheet for connection details.

2 - 31