Polycom VSX Series manual Configuring Directory Settings

Administrator’s Guide for the VSX Series

Points to note about cascaded calls:

• You cannot place cascaded multipoint calls through PathNavigator.

•Polycom StereoSurround, Pro-Motion, AES encryption, continuous presence, chair control, People+Content, and H.239 are not supported in cascaded calls.

•H.264 is only supported when all of the MCUs are VSX 8000 systems and each VSX 8000 calls no more than three other systems.

Configuring Directory Settings

You can customize the behavior of the directory on the Directory screen.

To configure system settings:

1.Go to System > Admin Settings > General Settings > System Settings > Directory.

2.Configure these settings:

Setting	Description
System Name	Enter or change the system name in this field. This name
	appears on the screen for the far site when you are making
	calls.
Localized System	Displays the localized system name, if you have entered
Name	one. You can enter a Localized System Name for
	Simplified Chinese on this screen using the Chinese Virtual
	Keyboard. You must use the VSX Web interface to enter
	localized system names for other languages.
	The localized system name is sent to the far site and
	displayed as the caller ID by VSX systems using version 8.0
	or later, when the user interface is set to that language.
	However, the English/Pinyin name is the name used by the
	Global Directory Server and the gatekeeper, and it is also
	the name that shows up in the Recent Calls list.
Allow Directory	Specifies whether users can save changes they make to the
Changes	directory.
Confirm Directory	Specifies whether users are prompted to confirm new
Additions Upon	directory entries when saving the information for the last site
Call Disconnect	called.
Confirm Directory	Specifies whether users are prompted to confirm deletions
Deletions	of directory entries.

4 - 44