Polycom VSX Series manual Configuring for Snmp Management

Managing the System Remotely

Configuring for SNMP Management

To configure the VSX system for SNMP Management:

1.Access the SNMP configuration screen either in VSX Web or on the VSX system. In VSX Web go to Admin Settings > Global Services > SNMP. On the VSX system go to System > Admin Settings > Global Services > SNMP.

2.Configure these settings:

Setting	Description
Enable SNMP	Allows administrators to manage the system remotely
	using SNMP.
Community	Specifies the SNMP management community in which you
	want to enable this system. The default community is
	public.
	Note: Polycom does not support SNMP configuration and
	administration on VSX systems, therefore only one
	community string is used for both read and write.
Contact Name	Specifies the name of the person responsible for remote
	management of this system.
Location Name	Specifies the location of the system.
System Description	Specifies the type of video conferencing device.
Console IP	Specifies the IP address of the computer you intend to use
Address	as your network management station and to which SNMP
	traps will be sent.

5 - 11