Polycom VSX Series manual Go to System Admin Settings Monitors Multipoint Setup, Multipoint Mode

Customizing the VSX System

Configuring Multipoint Settings

You can customize the way video is handled in multipoint calls to best support the types of calls your organization is making.

To configure multipoint video:

1.Go to System > Admin Settings > Monitors > Multipoint Setup.

2.Configure these settings:

Setting	Description
Auto-Answer	Specifies whether to accept incoming multipoint calls
Multipoint	automatically.
VSX 3000
VSX 3000A
VSX 7000
VSX 7000s
VSX 7000e
VSX 8000
Multipoint Mode	Auto — The view switches between Full Screen
VSX 3000	mode and Discussion mode, depending on the
	interaction between the sites.
VSX 3000A
VSX 7000	If multiple sites are talking at the same time,
VSX 7000s	Discussion mode is used. If one site is talking uninterrupted
VSX 7000e	for at least 15 seconds, the speaker appears full screen.
VSX 8000	Discussion — All sites are displayed at the same
	time in separate windows on the display. This mode
	is also called continuous presence.
	Presentation — The speaker sees all other sites in
	discussion mode while the other sites see the
	speaker in full screen mode.
	Full Screen — The site that is speaking is shown in
	full screen to all other sites. This mode is also called
	voice-activated switching.

4 - 41