Polycom VSX Series 320, Enable Voice, Over Isdn, 35/RS-449, RS-530, Enable Analog, Phone, Method

Configuring Network Use

Setting	Description
Enable ISDN	Allows the system to make ISDN calls.
H.320	This selection is only available when the system has ISDN
VSX 3000	networking capability.
VSX 3000A
VSX 7000
VSX 7000s
VSX 7000e
VSX 8000
Enable Voice	Allows the system to make voice-only calls to phones
Over ISDN	connected to an ISDN network, such as an organization’s
	PBX.
Enable	Allows the system to make calls through your third-party
V.35/RS-449/	network equipment.
RS-530	This selection is only available when the system has a
VSX 7000	V.35/RS-449/RS-530 network module installed.
VSX 7000s
VSX 7000e
VSX 8000
Enable Analog	Allows the system to make voice-only calls to any phone using
Phone	an analog phone line.
VSX 7000e	Disable this setting to remove a SoundStation VTX 1000
VSX 8000	conference phone from the dialing order.
Enable ISDN	Allows users to choose whether to place IP-to-ISDN calls
Gateway	through a gateway.

To make the enabled call types available on the Place a Call screen, you must enable the Call Quality setting described on page 4-48.

1.Select and configure these settings:

Setting	Description
Preferred Dialing	Specifies the preferred method for dialing various call types. If
Method	set to Auto, calls use the configured Dialing Order. If set to
	Manual, the system prompts the user to select the call type
	from a list when placing a call.
Dialing Order	Specifies how the system places calls to directory entries that
	have both IP and ISDN numbers. It also specifies how the
	system places calls dialed manually, when the call type
	selection is either unavailable on the home screen or set to
	Auto. If a call attempt does not connect, the system tries to
	place the call using the next call type in the Dialing Order.
	This setting is available only when Preferred Dialing Method
	is set to Auto.
	For more information, refer to Configuring Dialing Order
	Settings on page 3-30.

3 - 29