Installation
Ô NOTES Ô
Entering your Area Code
When the area code has already been stored in memory, the stored area code will be displayed. To change it, use the CH/ DELETE and number keys to enter the new area code. Then press REMOTE/ SELECT. A confirmation tone sounds.
To complete the setting, press END or return the handset to the base unit.
Choosing the Dial Mode
•Make sure your battery pack is fully charged before choosing the dialing mode.
•If you are not sure of your dialing system, make a trial call. If the call connects, leave the setting as is, otherwise set for pulse dialing.
•If your phone system requires pulse dialing and you need to send the standard tones for certain situations during a call, you may “switch- over” to tone dialing (Refer to “Tone Dialing
4.Use the number keys (0 to 9) or CH/DELETE to enter the
5.Press REMOTE/SELECT. A confirmation tone sounds and the displayed area code is entered.
6.Press END or return the handset to the base unit to complete the setting. The handset returns to the standby mode.
Choosing the Dial Mode
Most phone systems use tone dialing which sends standard tones through the phone lines. However, some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing.
Depending on your dialing system, set the mode as follows: Ô
1.When the phone is in the standby mode, press and hold CID/MENU.
2.Press 
VOL three times to select Dial.
3.Press REMOTE/SELECT to toggle between
Tone and Pulse.
4.Press END or return the handset to the base unit to complete the setting. The handset returns to the standby mode.
Setting the Language
1.When the phone is in the standby mode, press and hold CID/MENU.
2.Press 
VOL four times to select Language.
3.Press REMOTE/SELECT to select from Eng (English), Fr. (French) and Esp (Spanish).
4.Press END or return the handset to the base unit to complete the setting. The handset returns to the standby mode.
10
