Caller ID
Ô NOTES Ô
Long Distance Calls and
Area Code Setting/
Cancellation
When a long distance call has been set, 1 appears in the display.
Storing Caller ID
Messages in Memory
Dialing
•You can not store a Caller ID message if no phone number appears in the message.
•If a message has already been stored in the selected memory number location, a confirmation screen is
displayed. Press 
VOL to select Yes. Press
REMOTE/SELECT to overwrite. The display returns to the Caller ID list.
2.Press TALK/FLASH. The displayed phone number dials automatically.
You can also place a call from Talk Mode.
1.Press TALK/FLASH. Then press CID/MENU.
2.Select the phone number that you want to dial by pressing the 
VOL or 
VOL.
3.Press REMOTE/SELECT. The displayed phone number will be dialed.
Long Distance Calls and Area Code Setting/Cancellation
Pressing 1 while the incoming Caller ID information is displayed will place or remove the prefix 1 in the display to set up for a long distance call or cancel.
Pressing 3 will set or cancel an area code setting. Ô
Storing Caller ID Messages in Memory Dialing
Messages shown in the Caller ID list can be stored in memory dialing.
Using the incoming call information (i.e., Caller ID list), the phone number of the party on the Caller ID list can be stored in memory.
1.Press CID/MENU.
Select the phone number to be stored from the Caller ID list by pressing 
VOL or 
VOL.
2.Press MEM.
3.Press 
VOL and 
VOL or enter a number (0- 9) to select the memory location to be stored.
4.Press REMOTE/SELECT. Ô
You hear a confirmation tone and the number is stored in memory.
The display returns to the Caller ID list.
24
