Memory Dialing
1.Press MEM. Select Memory is displayed.
2.Press 
VOL or 
VOL, or enter a number (0- 9) to select the memory location where you would like to store the number.
3.Press MEM or REMOTE/SELECT.
4.Press MEM or REMOTE/SELECT. A cursor flashes indicating that the display is ready for the name to be entered.
If Edit MemoryXX appears, the selected memory location is already stored. Then you
must either edit the entry in this location, delete the entry in this location, or select Go Back to choose another location.
5.To enter a name (up to 13 characters), use number keys.
• See “Steps for Entering Names and Special Characters” on page 15.
• Use #/> and 
/TONE/< to move the cursor to the desired location.
• Use CH/DELETE to delete characters as needed.
• Press and hold CH/DELETE to delete all the characters.
• If a name is not required, go to step 6.
6.Press MEM or REMOTE/SELECT. Store Number is displayed.
The cursor flashes indicating that the display is ready for the number to be entered.
7.Use the number keys to enter the phone number.
The phone number cannot exceed 20 digits.
14
