Radio Shack 43-3857 owner manual Remote Operation, Remote access away from home

A beep that can be heard by both parties sounds during recording.

2.To stop recording, press (PLAY/STOP) or MEMO REC. You hear a confirmation tone.

REMOTE OPERATION

Remote access away from home

You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete message. When using any touch- tone telephone, you can even record a new greeting message.

1.Call your telephone number.

2.During the greeting message, press 0 and enter your PIN code. (See “Setting a Personal Security Code (PIN)” on page 28.)

3.The answering system announces the current time and the number of messages stored in memory. Then you hear “To play incoming message, press 02. For help, press 10”.

4.You may continue to listen to the Voice

Prompts, or you may select a command from the following chart. Ô

Command	Function
0 and 1	Repeat a Message
0 and 2	Playing Incoming Messages
0 and 3	Skipping a Message
0 and 4	Deleting a Message
0 and 5	Stop Operation
0 and 6	Answering System On
0 and 7	Memo Record/Stop*
0 and 8	Greeting Message Record/Stop*
0 and 9	Answer System Off
1 and 0	Voice Prompts

Ô NOTE Ô

Once you enter the remote access menu, you must enter a command within 15 seconds,or the answering system automatically hangs up and returns to standby.

The Integrated Answering Device

37