Remote access with the handset
You can operate your answering system from another room using a handset. Ô
1.With the phone in standby mode, press
REMOTE/SELECT on the handset. Remote AnsweringMachine operation appears on the display. The answering system announces the current time and the number of messages stored in the memory.
2.You hear "To play incoming message, press 2. For help, press 0." You hear intermittent beeps.
3.Enter a command within 15 seconds. You may select a command from the following chart:
Command | Function | |||||||
|
|
|
|
|
|
|
|
|
|
|
| /1 | Repeat a Message | ||||
| ||||||||
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| /2 | Play Incoming Messages | ||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
| /3 | Skip a Message | |||
|
| |||||||
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
| /4 | Delete a Message | |||
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| /5 | Stop Operation | |||||
| ||||||||
| ||||||||
6Answering System On
9Answering System Off
0Voice Prompts
4.After the command has finished, you hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart on step 3.
5.When you are finished, press END to exit the system. The answering system automatically returns to standby.
Ô NOTES Ô
•If you press END before the base is connected, the phone will return to standby.
•If the base is not connected within five seconds, you hear beeps and the phone will return to standby.
•The base's keypad is disabled during remote operation.
•If you receive a call, the remote operation is canceled.
•During the remote operation [ - - ] appears on the base.
•If you have new messages and old messages, only the new messages will be played. After you have reviewed your new messages, you can play your old messages by pressing 
/2 again.
The Integrated Answering Device
39
