-
(PLAY/STOP) is pressed
-Ten seconds elapse without a key press
-An incoming call is received
•If the system remains idle for about five seconds after the announcement, the system returns to standby. Once 
or 
/VOL/SEL is pressed, the idle time is extended to ten seconds.
Setting the Time
The clock on the answering system starts when power is supplied to the base. Follow these steps to set the clock to the correct time. Ô
1.Press MENU/CLOCK.
The system announces “Time”, the current time and the guidance for setting the time.
2.Press 
/VOL/SEL or 
/VOL/SEL until the correct day is announced. The numbers [ 
] through [ 
] are displayed on the base.
3.Press SET to select the day.
4.Press 
/VOL/SEL or 
/VOL/SEL until you hear the correct hour setting. The numbers [ 
] through [ 
] are displayed on the base.
5.Press SET to select the hour.
6.Press 
/VOL/SEL or 
/VOL/SEL until you hear the correct minute setting. The numbers [
] through [
] are displayed on the base.
7.Press SET to select the minute.
8.Press 
/VOL/SEL or 
/VOL/SEL until you hear the correct AM or PM setting. The message counter displays [ 
] or [ 
].
9.Press SET to select the AM/PM setting.
Ô NOTES Ô
•Normally the idle time for the menu mode is ten seconds before the system returns to standby. However for setting the time, the idle time is extended to two minutes.
•Press and hold 
/VOL/ SEL or 
/VOL/SEL to quickly scroll through the numbers on the display.
The Integrated Answering Device
27
