Setting the base ringer volume
You have three ringer options. One allows you to turn the ringer off. The other two are volume levels. You can change the ringer volume while in standby mode or the incoming call is ringing. Ô
1.Press RINGER.
You hear the ringer at the current volume level ([ 
] High, [
] Low, [
] Off) (if you set the base ringer volume to off, “Ringer off” is announced in standby mode.) and it is displayed on the base.
2.Press RINGER repeatedly until the desired ringer option appears.
3.The system displayed new ringer volume.
Temporarily Mute the Base Ringer and the Call Screen
Press 
(PLAY/STOP) to temporarily mute the incoming ring. This also mutes the caller's message being recorded (Call Screen). The ringer and the Call Screen will be heard with the next incoming call.
The base ringer mute is canceled when pressing
RINGER.
The Call Screen mute is canceled when pressing
/VOL/SEL or 
/VOL/SEL.
Adjusting the speaker volume level
You can adjust the volume of the base speaker by pressing the 
/VOL/SEL or 
/VOL/SEL on the base. Press 
/VOL/SEL for louder or 
/VOL/SEL for softer during the base speaker is being used except for menu mode. The base speaker volume also applies the Call Screen.
The numbers [ 
]are displayed on the base indicating the volume levels. [ 
] being the softest and [ 
] being the loudest.
Ô NOTE Ô
Although you have set the base ringer to off, you will still hear the ringer from the handset on the base.
The Integrated Answering Device
33
