Headset Features
Headset Controls
Headset Power
Now that you’ve assembled your headset, installed the software and connected your phones, read this section to learn about the headset features, how to use the controls and more.
1Headset LED Flashes white when in use
2Volume up button Press to increase volume
3Call control button Press to place, answer, end a call
4Mute button During a call, press to mute
5Volume down button Press to decrease volume
6Flash During a call, long press the volume button up or down for 1.5 seconds, will put call on hold and answer second incoming call
For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and
hearing visit www.plantronics.com/healthandsafety .
If the headset battery is installed and charged, the headset is automatically on. The headset does not have an on/off button. If you won’t be using the headset for a long period of time and the headset will not be in the charging cradle, place the headset in sleep mode.
Place the Headset in Sleep Mode
Placing the headset in sleep mode with a fully charged battery will provide up to 50 hours of standby time.
1While the headset is idle, press the call button for three seconds until you see the headset flash white twice.
2To wake the headset, press the call button again until you see two white flashes or hear three high tones.
Battery Storage Time
If you remove a fully charged battery from the headset, it will provide up to 75 days of battery storage time, stored under normal conditions.
15
