Polycom VSX Series manual Go to System Admin Settings Monitors Graphics VGA

Administrator’s Guide for the VSX Series

Configuring Content Display with a Visual Concert VSX or ImageShare II

Configure the content display for a set-top or component VSX system after connecting a Visual Concert VSX or ImageShare II unit as described in the section Connecting Content Sharing Equipment on page 2-28.

To configure the content display:

1.Go to System > Admin Settings > Monitors > Graphics VGA.

2.Configure these settings:

Setting		Description
VGA Output with		Indicates that the screen appears black when there is no
No Graphics		content to display.
VGA Resolution		Specifies the VGA resolution for your monitor.
		Select the maximum VGA resolution that your monitor or
		projector can support. Consult the user manual provided with
		the VGA monitor or projector for performance information.
Quality		Specifies the bandwidth split for People and Content video.
Preference		• Both—50% Content, 50% People
		• Content—90% Content, 10% People
		• People—10% Content, 90% People
		Notes: In a multipoint call, the MCU setting determines the
		People and Content video rates, not the system sending the
		content.
		This setting does not apply if automatic bandwidth adjustment
		is enabled using the API.
Send Content		Specifies whether to send content automatically when the
When PC		computer is connected to the Visual Concert VSX or
Connects		ImageShare II.
		If this option is not selected, the presenter must press the
		Play button on the Visual Concert VSX or ImageShare II to
		send content to the far sites.
3. Select	if you need to adjust the VGA Input settings for systems that

have built-in VGA capture capability or that use a Visual Concert VSX for VGA capture.

a.Select Horizontal Position, Vertical Position, or Phase.

b.Press the navigation buttons on the remote control to adjust the setting.

c.Press Back on the remote control to accept the setting.

4.Go to System > Admin Settings > Monitors > Monitors.

4 - 16