Polycom VSX Series manual Configuring VCR/DVD Player Settings, Audio I/O Set Line Inputs to VCR

Administrator’s Guide for the VSX Series

Configuring VCR/DVD Player Settings

You can connect a VCR or DVD player to VSX systems. For information about connecting a VCR or DVD player, see the section Connecting VCR/DVDs on page 2-28.

Playing a Videotape or DVD

All VSX systems can play a videotape or DVD during calls. The VCR/DVD inputs are active when you select the camera source configured as VCR.

To configure VCR/DVD audio settings for playing a videotape or DVD:

Go to this screen:	Configure these settings:
Audio Levels	Ensure that Midrange Speaker is On.
VSX 6000, VSX 6000A, VSX 7000,
VSX 7000s
System > Admin Settings > Audio >
Audio Settings > Next > Next
Audio I/O	Set Line Input(s) to VCR.
VSX 3000, VSX 3000A, VSX 5000,	Adjust the Level for playback volume, if
VSX 6000, VSX 6000A, VSX 7000:	necessary.
System > Admin Settings > Audio >
Audio Settings > Next
VSX 8000:
System > Admin Settings > Audio >
Audio Settings > Next > Next > Next
VCR/DVD	Adjust the VCR/DVD In Level for
VSX 7000s, VSX 7000e	playback volume, if necessary.
System > Admin Settings > Audio >
Audio Settings > Next

Recording a Call to Videotape or DVD

With VSX 6000, VSX 7000, VSX 7000s, VSX 7000e, and VSX 8000 systems, you can connect a VCR or DVD player to record your video conference. You can also connect two VCRs or DVD players, to play material and record the call at the same time.

All audio from the near site and far site is recorded, along with the video source configured on the Monitors screen.

4 - 18