Polycom VSX Series manual Configuring the Serial V.35/RS-449/RS-530 Network Interface

Administrator’s Guide for the VSX Series

Configuring the Serial V.35/RS-449/RS-530 Network Interface

If you have a VSX 7000, VSX 7000s, VSX 7000e, or VSX 8000 system, the optional serial V.35/RS-449/RS-530 network interface allows you to connect to data communications equipment using a V.35, RS-449, or RS-530 serial interface.

To configure the V.35/RS-449/RS-530 network interface settings:

1.Go to System > Admin Settings > Network > V.35/RS-449/RS-530.

2.Configure these settings:

Setting	Description
Enable	Allows the system to connect to a terminal adapter using
V.35/RS-449/RS-530	a V.35, RS-449, or RS-530 connection.
V.35 Ports Used	Specifies whether one or two lines are connected.
RS-366 Dialing	Allows users to dial calls from this system.
	Clear this setting if this is a dedicated connection or if
	another device is used for dialing calls.
Area Code	Specifies the area code and number(s) that other sites
Port 1	dial to reach this system.
	If this is a dedicated connection, leave these fields blank.
Port 2

3.Select and configure these settings:

Setting	Description
Prefix	Lets you specify the dialing prefix required to reach an
	outside line.
Calling Profile	Lets you specify what data communications equipment is
	connected to the network interface. The system
	automatically displays the default prefixes, suffixes, and
	calling speeds required by that device.
	If your device is not listed, select Custom.
Speed	Lets you define the prefixes or suffixes to use for each
	speed used in a Custom Calling Profile. For information
	about required prefixes and suffixes, see the
	documentation that came with the device.
	If you choose a predefined Calling Profile, this
	information is supplied for you.

3 - 24