Polycom VSX Series manual Monitoring a Room or Call with VSX Web

Administrator’s Guide for the VSX Series

To access the system using VSX Web:

1.On a computer, open a web browser.

2.In the browser address line, enter the system’s IP address, for example, http://10.11.12.13, to go to VSX Web.

If Security Mode is enabled on the system, you must use secure HTTPS access, for example, https://10.11.12.13. Click Yes in the security dialog boxes that appear.

3.Enter admin as the user name, and enter the remote access password, if one is set.

You can use VSX Web to configure all of the system settings except the remote management settings. For security reasons, these settings must be configured on the local system by an administrator.

Monitoring a Room or Call with VSX Web

The monitoring feature within VSX Web allows administrators of VSX systems to view a call or the room where the system is installed. For security reasons, this feature can only be enabled on the local system by an administrator.

To enable room and call monitoring:

1.Go to System > Admin Settings > General Settings > Security.

2. Select and enable Allow Video Display on Web to allow the room or call to be viewed remotely.

5 - 2