Polycom VSX Series manual Actions that Cause the System to Restart, Connect to My LAN Host Name

Administrator’s Guide for the VSX Series

Actions that Cause the System to Restart

The VSX system restarts in the following situations:

•Changing Monitor 1 configuration from non-VGA to VGA, or from VGA to non-VGA. If the VSX system is connected to a single VGA monitor, you must hold down the asterisk button on the remote control while the system restarts.

•Changing any of the following settings in the LAN Properties screens:

—Connect to My LAN

—Host Name

—IP Address — Changing how the system obtains an IP address or changing the address that you have entered manually

—DNS Servers

—Default Gateway

—Subnet Mask

—WINS Server

—LAN Speed

—Duplex Mode

•Changing any setting under Enable Remote Access, on the Security screen:

—FTP

—Web

—Telnet

—SNMP

•Changing the Web Access Port on the Security screen

•Changing any setting on the SNMP screen:

—Enable SNMP

—Community

—Contact Name

—Location Name

—System Description

—Console IP Address

•Changing the Security Mode setting

Appendix - 10