Polycom VSX Series Specifying SIP Settings, Go to System Admin Settings Network IP SIP Settings

Administrator’s Guide for the VSX Series

Specifying SIP Settings

If your network supports the Session Initiation Protocol (SIP), you can use SIP to connect IP calls.

To specify SIP Settings:

1.Go to System > Admin Settings > Network > IP > SIP Settings.

2.Configure these settings:

Setting	Description
Transport	Indicates the protocol the system uses for SIP signaling.
Protocol	The SIP network infrastructure in which your VSX system is
	operating determines which protocol is required. For example, if
	your VSX system is operating in a Microsoft® Live
	Communication Server (LCS) SIP network, choose TCP. If your
	VSX system is operating in a Nortel Multimedia Communication
	Server (MCS) SIP network, choose UDP.
User Name	Specifies the system’s SIP name. If you leave this field blank, the
	system’s IP address is the SIP user name.
Password	Specifies the password that authenticates the system to the
	Registrar Server.
Registrar	Specifies the DNS name or IP address of the SIP Registrar
Server	Server.
	By default, the SIP signaling is sent to port 5060 on the registrar
	server. To specify a different port, add it to the address as shown
	here:
	10.11.12.13:5070
Proxy Server	Specifies the DNS name or IP address of the SIP Proxy Server. If
	you leave this field blank, no proxy server is used.
	By default, the SIP signaling is sent to port 5060 on the proxy
	server. To specify a different port, add it to the address as shown
	here:
	10.11.12.13:5070

3 - 12