Polycom VSX Series manual On the Diagnostics screen Select Diagnostics Reset, Select Reset System

Diagnostics and General Troubleshooting

Reset and Restart

Diagnostic Tool	In the system’s user interface	In the VSX Web
Reset System	1. On the Diagnostics screen,	1. Select Diagnostics > Reset
Cycles power to the system.	select Reset System.	System.
When you reset the system using	2. Enter the system’s serial	2. Click the Reset System icon.
the remote control, the system’s	number.
user interface allows you to:	3. If you wish to restore the
• Keep your system settings	original factory settings, select
	Delete System Settings.
(such as system name and
network configuration) or	This deletes the system
restore factory settings.	passwords, CDR, and CDR
• Keep or delete the directory	archive along with the other
	system settings. You may wish
stored on the system.
	to download the CDR and CDR
Note: If Security Mode is enabled,
	archive before you reset the
you must enter the room password
	system. See Call Detail Report
to reset the system.
	(CDR) on page 6-4. If you
	delete system settings, the
	setup wizard will lead you
	through the initial configuration
	after the system restarts.
	4. If you wish to remove the
	directory, select Delete
	Directory Entries.
	This only deletes the system’s
	local directory. System reset
	does not affect the global
	directory.
	5. Select Reset System.

7 - 7