Polycom VSX Series manual Connecting Content Sharing Equipment, Connecting VCR/DVDs

Administrator’s Guide for the VSX Series

Place the speaker connected to the audio system’s right channel on the right side of the system, and the other speaker on the left side. For best results, place the speakers about 60° apart as seen from the center of the conference table.

Left speaker

Connect to left audio output (white)

Right speaker

Connect to right audio output (red)

60˚

If you are using a subwoofer, place it beside a wall or in a corner near the speakers.

Connecting Content Sharing Equipment

All VSX systems can play VCR tapes or DVDs into calls. All set-top and component VSX systems also provide ways to show material from your computer.

Connecting VCR/DVDs

You can connect a VCR/DVD to any VSX system to play VCR tapes or DVDs into calls. If your system is a VSX 6000, VSX 7000, VSX 7000s, or component system, you can also connect a VCR/DVD to record your video conferences.

To set up a VCR or DVD to play:

¾On the VCR/DVD, connect the outputs to the VCR/DVD inputs on the VSX system. The system’s VCR/DVD inputs are on the top row of connectors. Refer to your system’s setup sheet for connection details.

The microphone inputs remain active while the VCR/DVD is playing. Call participants may wish to mute the microphones while playing VCR/DVD content.

2 - 28