Polycom VSX Series manual Configuring Call Settings

Administrator’s Guide for the VSX Series

Configuring Call Settings

The Call Settings screens provide access to high-level options for the entire system. For convenience, some of the User Settings options are repeated on these screens.

To configure call settings:

1.Go to System > Admin Settings > General Settings > System Settings > Call Settings.

2.Configure these settings:

Setting	Description
Allow Mixed IP	Specifies whether users can make multipoint calls that
and ISDN Calls	include both IP and H.320 sites.
VSX 3000	Clearing this option provides extra security for systems
VSX 3000A	requiring LAN connectivity while placing encrypted calls over
VSX 5000	ISDN lines. If you clear this selection, IP endpoints cannot
VSX 7000	join ISDN calls.
VSX 7000s
VSX 7000e
VSX 8000
Maximum Time in	Enter the maximum number of minutes allowed for call
Call	length.
	When that time has expired, you see a message asking you
	if you want to hang up or stay in the call. If you do not answer
	within one minute, the call automatically disconnects. If you
	choose to stay in the call at this time, you will not be
	prompted again.
	Choosing 0 removes any limit.
Auto-Answer	Specifies whether to answer incoming point-to-point calls
Point to Point	automatically.
Auto-Answer	Specifies whether to answer incoming multipoint calls
Multipoint	automatically.
VSX 3000
VSX 3000A
VSX 7000
VSX 7000s
VSX 7000e
VSX 8000

4 - 38