Polycom VSX Series manual Designing Audio Behaviors, Configuring General Audio Settings

Administrator’s Guide for the VSX Series

Designing Audio Behaviors

This section describes how to configure the audio behavior of a VSX system, including:

•General audio settings

•Settings for Polycom StereoSurround

•Settings for the Polycom Vortex mixer

•Settings for microphones connected directly to the balanced audio inputs

Configuring General Audio Settings

The Audio Settings screens let you specify the settings appropriate for the equipment you are using.

To configure general audio settings:

1.Go to System > Admin Settings >Audio > Audio Settings.

The Audio screen, where you choose Audio Settings or Stereo Settings, is not present on a VSX 3000 or VSX 3000A. It is available on a set-top or component system after you have enabled the Polycom StereoSurround option.

2.Configure these settings:

Setting	Description
Sound Effects	Sets the volume level of the ring tone and user alert tones.
Volume
Incoming Video	Specifies the ring tone used for incoming calls.
Call
User Alert Tones	Specifies the tone used for user alerts.
Mute Auto-Answer	Specifies whether to mute incoming calls.
Calls	Incoming calls are muted by default until you press the mute
	on the microphone or on the remote control.
Enable Internal	Specifies an additional ring tone when receiving an
Ringer	incoming call. The internal ringer is built into the system and
VSX 3000	alerts you to incoming calls.
VSX 3000A

4 - 20