Polycom VSX Series manual Setting Description VCR/DVD Audio, Out Always On

	Customizing the VSX System
Setting	Description
VCR/DVD Audio	Allows you to record a call using one VCR or DVD, while
Out Always On	playing recorded content into the call from a second VCR or
VSX 7000s	DVD.
VSX 7000e	Do not select this setting if you have only one VCR or DVD
VSX 8000	player connected.

3.Select to go to Camera Settings:

—Specify the name, icon, and format for each video source.

—VSX 6000, VSX 7000, VSX 7000s, VSX 7000e, VSX 8000: Specify whether secondary camera sources are People or Content. Camera sources specified as Content are sent at a higher resolution and lower frame rate.

4.Select to go to Video Quality.

5.Select Motion or Sharpness for the video inputs:

—Motion — This setting is for showing people or other video with motion.

—Sharpness — The picture will be sharp and clear, but motion will not be smooth. Choose this setting for document cameras. Sharpness is available in point-to-point H.263 calls only.

6.Set Pro-Motion Video to specify when to use Pro-Motion for video inputs set for motion. Pro-Motion provides 50/60 fields per second interlaced video for TV-like quality at higher bandwidths.

—VSX 3000 and VSX 3000A systems send Pro-Motion video for the DVD/VCR input only.

—VSX 5000, VSX 6000, and VSX 6000A systems can receive Pro-Motion video but cannot transmit it.

7.Select to go to Camera Calibration. Only VSX 7000e and VSX 8000 systems with a PowerCam Plus camera can be calibrated for automatic camera tracking. Follow the instructions on the screen to calibrate the camera for automatic camera tracking if it consistently moves too far in

one direction when tracking is enabled. Press Near on the remote control so that you can zoom the camera in on your mouth.

For the best calibration results, make sure the camera and system are set up as described in Configuring Automatic Camera Tracking on page 4-4and Connecting Cameras to Component Systems on page 2-15.

4 - 3