Brocade Communications Systems 6910 manual IronWare traps, General traps

IronWare traps

IronWare traps

This section presents the IronWare traps supported on devices running IronWare software.

NOTE

The Traps in the IronWare MIBs include the following lines in their description:

--#TYPE "Brocade Trap: Power Supply Failure"

--#SUMMARY "Power supply fails, error status %d." --#ARGUMENTS { 0 }

--#SEVERITY MINOR

--#STATE OPERATIONAL

These lines are used by the HP OpenView network management system.

General traps

The table below lists the general traps generated by devices. Refer to the previous sections in this chapter to determine if traps for a feature need to be enabled.

Trap Name and Number	Varbind	Severity	Description
snTrapUserLogin	snAgGblTrapMessage	Informational	The SNMP trap that is generated
brcdIp.0.75			when a user logs in to a device.
			Sample Trap Message:
			Security: telnet login
			from src IP 10.37.21.63 to
			USER EXEC mode.
snTrapUserLogout	snAgGblTrapMessage	Informational	The SNMP trap that is generated
brcdIp.0.76			when a user logs out of a device.
			Sample Trap Message:
			Security: telnet logout
			from src IP 10.37.21.63
			from USER EXEC mode.
snTrapClientLoginReject	snAgGblTrapMessage	Informational	The SNMP trap that is generated
brcdIp.0.110			when a login attempt by a telnet or
			SSH client fails.
			Format:
			Security: {snmp sshtelnet web}
			access [by user <name>] from src [IP
			<ipv4> IPv6 <ipv6>] rejected, <n>
			attempts

60	Brocade 6910 Ethernet Access Switch MIB Reference
	53-1002582-01