Brocade 6910 Ethernet Access Switch MIB Reference 61
53-1002582-01

IronWare traps

Port security traps

The Port Security feature enables a device to learn a limited number of “secure” MAC addresses on

an interface. The interface will forward only those packets with source MAC addresses that match

these secure addresses. If the interface re ceives MAC addresses that are included in its secure

MAC list, the device generates the following traps:

NOTE

These traps appy to ports that have the Port Security feature enabled.

Traps for stacking

Brocade supp orts for th e following traps for st acking.

snTrapSysMemoryLowThreshold
brcdIp.0.180
snAgGblTrapMessage Informational The SNMP trap that is generated
when memory utilization reaches the
memory rising threshold (set by the
CLI memory command).
snTrapTemperatureOK
brcdIp.0.1001
snAgGblTrapMessage Informational The SNMP trap that is generated
when the actual temperature re ading
falls from the rising threshold and
reaches the falling threshold.
Sample Trap Message:
System: Stack unit
<unitNumber> temperature
<actual-temp> C degrees is
normal
Trap Name and Number Varbind Severity Description
snTrapPortSecurityViolation
brcdIp.0.77
snAgGblTrapMessage Minor The SNM P trap that is generated
when insecure MAC addressesare
received from a port with MAC
security feature enabled.
Sample Trap Message:
Brocade Trap: Port
Security Violation
Trap Name and Number Varbind Severity Description
snTrapStackingChasPwrSupplyOK
brcdIp.0.166
snChasUnitIndex,
snChasPwrSupplyIndex,
snAgGblTrapMessage
Minor The SNMP trap that is generated
when a power supply operational
status changed from failure to
normal for a stacking system.
Sample Trap Message
System: Stack unit
<unitNumber>
Power supply
<snChasPwrSupplyIndex> is
up
Trap Name and Number Varbind Severity Description