Electrical connection U.K | Miele T4819Ci specification

Electrical connection

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK).

Ensure power is not supplied to the appliance until after installation work has been carried out.

The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply. Please ensure the connection data quoted on the data plate match the household mains supply.

Connection should be made via a suitable switched socket which is easily accessible after installation.

For extra safety it is advisable to protect the appliance with a suitable residual current device (RCD). Contact a qualified electrician for advice.

Do not connect via an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).

Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.

WARNING: THIS APPLIANCE MUST BE EARTHED

52

Image 52

Miele T4819Ci operating instructions Electrical connection U.K, Non-rewireable plugs BS

Contents

Operating instructions For condenser tumble dryer T 4819 Ci Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tips Contents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Operating the tumble dryer Control panel Display shows Programme duration / Estimated time remainingFollowing are also selected via the display Garment care label symbols Tips on dryingDrying Ironing How to dry correctly Brief instructionsSort the laundry Turn on the tumble dryer Select a programme Select any Extra options / Delay startDrying level programmes Before the end of a programme Start the programmeRemove the laundry at the end of the programme Delay start Extra options / Delay startExtra options Cottons Max. load 6 kg Extra dry, Normal Hand iron, Machine ironMinimum iron Max. load 3 kg Normal, Hand iron Delicates Max. load 2 kg Normal, Hand iron Programme chart Shirts Max. load 2 kg Normal, Hand iron Cool air Max. load 6 kgWarm air Max. load 6 kg Gentle smoothing Max. load 1 kg Altering Delay start Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has started To activate the lock Electronic system lockTo deactivate the lock Cleaning and care Emptying the condensed water container Cleaning the fluff filters Cleaning them whilst dry Cleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unit Checking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messages Problem Possible cause Remedy Airways indicatorTo switch off this To switch off this warning Problem Possible cause Remedy Start/Stop button is Programme indicatorFlashing slowly Display is dark An unsatisfactory drying result Other problems Problem Possible cause Remedy Drying processEven switches off Goes on too long or Problem Possible cause Remedy Water leaks from Been cleanedPower cut Dryer after Changing the lamp After Sales service Future updates PCAppliance guarantee Optional accessories Installation Front view Installation site Building under a continous worktop / in a kitchen run Levelling the appliance Room ventilation Before moving the tumble dryer again e.g. when moving houseWasher-dryer stack Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel Preparing the front panel Fitting a door front panel made by another manufacturerWith spacer bars Without spacer bars Preparing the fixing points Installation Plinth facing dimensionsFitting a plinth facing General notes External condensed water outletArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gully Installation Electrical connection Non-rewireable plugs BSElectrical connection U.K Consumption data Woollens handcare Technical data Programmable functions To check the settingReduced residual moisture. Laundry drier Programmable functions Anti-crease Hours anti-crease factory default settingAnti-crease off Hour anti-crease Altering the volume of the buzzer Normal buzzer Factory default setting Loud buzzer Reduced residual moisture. Laundry drier Extending the cooling down time Cooling down time extended by ten minutes Factory default. Not in current programme StandbyOff Follow the steps ,, ... to programme and store in memory Factory default setting. Not in current programme Memory deactivated factory default setting Memory activated Memory function Clean out airways indicator Keypad tone Adjusting the dryers electronics for very soft water Factory default setting Adjusted for very soft water Extending the range of the drying levels Alteration rights reserved/0113 Nr 844 000