Cleaning the tumble dryer | Miele T4819Ci guide

Cleaning and care

Cleaning the tumble dryer

Disconnect the tumble dryer from the mains electricity supply.

Miele branded cleaning and conditioning products are available to order via the internet on www.miele-shop.com.

Clean the housing and control panel with a slightly damp cloth and a mild detergent or soapy water.

The drum and other stainless steel parts can be cleaned with a suitable stainless steel cleaner following the manufacturer's instructions.

Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaners. These could damage plastic sufaces and other parts.

Dry all parts with a soft cloth.

29

Image 29

Miele T4819Ci operating instructions Cleaning the tumble dryer

Contents

Operating instructions For condenser tumble dryer T 4819 Ci Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tips Contents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Control panel Operating the tumble dryer Following are also selected via the display Programme duration / Estimated time remainingDisplay shows Tips on drying Garment care label symbolsDrying Ironing Brief instructions How to dry correctlySort the laundry Turn on the tumble dryer Drying level programmes Select any Extra options / Delay startSelect a programme Remove the laundry at the end of the programme Start the programmeBefore the end of a programme Extra options Extra options / Delay startDelay start Hand iron, Machine iron Cottons Max. load 6 kg Extra dry, NormalMinimum iron Max. load 3 kg Normal, Hand iron Delicates Max. load 2 kg Normal, Hand iron Programme chart Cool air Max. load 6 kg Shirts Max. load 2 kg Normal, Hand ironWarm air Max. load 6 kg Gentle smoothing Max. load 1 kg Changing the programme sequence Altering Delay startOnce a programme has started Adding or removing laundry after a programme has started To deactivate the lock Electronic system lockTo activate the lock Emptying the condensed water container Cleaning and care Cleaning them whilst dry Cleaning the fluff filters Cleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unit Checking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guide Airways indicator Problem Possible cause RemedyTo switch off this To switch off this warning Programme indicator Problem Possible cause Remedy Start/Stop button isFlashing slowly Display is dark An unsatisfactory drying result Problem Possible cause Remedy Drying process Other problemsEven switches off Goes on too long or Been cleaned Problem Possible cause Remedy Water leaks fromPower cut Dryer after Changing the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessories Front view Installation Building under a continous worktop / in a kitchen run Installation site Washer-dryer stack Before moving the tumble dryer again e.g. when moving houseLevelling the appliance Room ventilation Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel With spacer bars Without spacer bars Fitting a door front panel made by another manufacturerPreparing the front panel Preparing the fixing points Fitting a plinth facing Plinth facing dimensionsInstallation Arranging the drain hose External condensed water outletGeneral notes External drainage via a sink or gully Installation conditions requiring a non-return valve Installation Electrical connection U.K Non-rewireable plugs BSElectrical connection Woollens handcare Consumption data Technical data Reduced residual moisture. Laundry drier To check the settingProgrammable functions Programmable functions Anti-crease off Hour anti-crease Hours anti-crease factory default settingAnti-crease Normal buzzer Factory default setting Loud buzzer Altering the volume of the buzzer Reduced residual moisture. Laundry drier Cooling down time extended by ten minutes Extending the cooling down time Standby Factory default. Not in current programmeOff Follow the steps ,, ... to programme and store in memory Factory default setting. Not in current programme Memory function Memory deactivated factory default setting Memory activated Clean out airways indicator Keypad tone Factory default setting Adjusted for very soft water Adjusting the dryers electronics for very soft water Extending the range of the drying levels Alteration rights reserved/0113 Nr 844 000