Installation
Matching the fascia panel to the height of adjacent drawer fronts
The fascia panel can be aligned with the drawer fronts by adjusting the spacer bars.
Using a socket spanner, turn clockwise or
If necessary individual bars can be removed or more added.
To do this, use the socket spanner to loosen the nuts.
An adapter kit with spacer bars and longer screws can be ordered as an optional accessory. This can be used to add spacer bars from below up to a maximum of 25 mm.
After fitting the bars, cut or pinch off any excess length from the screws.
Removing the spacer bars
All the spacer bars can be removed if the upper edge of the front panel needs to be flush with the upper edge of the appliance front directly underneath the fascia panel. See "Fitting a front panel made by another manufacturer".
Open the door. |
Unscrew and remove the 3 screws (see arrows).
Remove all the spacer bars.
The 3 holes which are now free should be used to screw the front panel to the machine front later on.
44
