Installation

1Adapter

2Nut

3Hose clip

4Extension hose (accessory)

5Non-return valve (accessory)

6Tumble dryer drain hose

￿Fit adapter 1 to the sink drain outlet using nut 2.

If this nut has a flat disc in it you should take the disc out first.

￿Attach the end of the extension hose 4 to adapter 1.

￿Use a screwdriver to tighten hose clip 3 up close to the nut.

￿Non-return valve 5 has to be fitted with the arrow pointing in the direction of flow (i.e. towards the sink). Otherwise water will not drain out of the machine.

￿Fit non-return valve 5 to the drain hose on the dryer 6 (make sure it is fitted correctly (see arrow on non-return valve).

￿Secure the non-return valve using hose clips (accessory).

51

Page 51
Image 51
Miele T4819Ci operating instructions Installation