Installation
Installation site
Make sure the dryer door can be opened without hindrance after installation.
Building under a continous worktop / in a kitchen run
This tumble dryer is specially designed for installation under a continuous worktop run in a fitted kitchen.
N = Niche height
When moving the dryer do not lift it by the drum door.
The dryer is supplied fitted with a cover plate instead of a machine lid. The cover plate is necessary to ensure electrical safety and must not be removed.
–Slides* can be used to protect the floor from damage when the machine is pushed into position or taken out for servicing.
–The electrical socket must be located in an accessible position near the tumble dryer.
Please note:
Niche height | Additional accessories |
| required |
820 mm | None |
|
|
from | Fit longer screw feet* (set to |
approx. 40 mm) | |
|
|
from | One raising kit* |
| |
from | Two raising kits* |
|
* these accessories are available to order
The tumble dryer must not be used without the front panel in place.
If the kitchen run has a continuous furniture plinth in place, a gap must be made for the tumble dryer.
42
