Installation

Fitting the front panel

The appliance front can be fitted with a door panel to match other kitchen units.

If fitted in a Miele kitchen, the door panel can be ordered pre-drilled with the necessary fixing holes.

If fitted in a non-Miele kitchen, a suitable panel will have to be drilled to suit by a qualified kitchen fitter. See "Fitting a door front panel made by another manufacturer" for details on preparing and drilling the fixing holes.

Front panel dimensions

Width: 592-596 mm

Thickness: 17 to 19 mm (corresponding to the thickness of the adjacent unit door front panels)

Fitting the front panel

￿Open the door.

￿Hold the front panel in the correct position in front of the appliance door.

￿Screw the front panel to the machine door.

If all the spacer bars have been removed:

You can also make use of the 3 holes at the top of the door plate to screw the front panel to the door plate.

Height: The height of the door front panel corresponds to the door height (H) of the adjacent units.

45

Page 45
Image 45
Miele T4819Ci operating instructions Fitting the front panel, Front panel dimensions