Installation
Fitting a plinth facing
The gap between the lower edge of the tumble dryer plinth and the floor can be closed up using a suitable kitchen furniture plinth facing.
The tumble dryer plinth has a special groove in which a plinth facing can be fitted.
Plinth facing dimensions
Length: 592 - 596 mm
Thickness: 8 mm
Height (H): The plinth facing height must be calculated after aligning the height of the appliance with the screw feet or after fitting the raising kit(s).
Installation |
Calculate height (H) from the floor up into the groove (on the underside of the tumble dryer).
Cut the plinth facing to size.
Slide it into the groove.
Useful tip:
If the dryer is fitted on a raising kit, you can use
48
