Polycom VSX Series manual Configuring Monitors, Go to System Admin Settings Monitors Monitors

Administrator’s Guide for the VSX Series

4.Press and hold a number to store the preset position.

To store a double-digit preset (10-99), hold the second number down. Any existing preset stored at the number you enter is replaced.

If Automatic Camera Tracking to Presets will be used during calls, set preset 0 to a wide shot of the room. When Automatic Camera Tracking to Presets is enabled and no one speaks for 30 seconds, the camera automatically moves to preset 0.

To delete all presets:

1.If a call is connected, press Near to choose a near-site video source.

2.Press Preset on the remote control.

3.Press Delete to delete all presets.

Configuring Monitors

The VSX system allows you to customize displays to suit your room and equipment configuration, including choosing the monitor for presenting content.

To configure monitors:

1.Go to System > Admin Settings > Monitors > Monitors.

2.Configure these settings:

4 - 6