Chapter 4 Printer Adjustments
3 Use of Narrow Media/Ribbons (Ribbon Tension Adjustments)
(2) Easy-to-slip ribbon and media
If a message 'RibonOut' is shown, set the mark on the feeding section to LOW by turning the
(3)Especially-easy-to-slip ribbon and media
If a message 'RibonOut' is still shown, although Step (2) has been performed, set the mark on the feeding section to SUPER LOW by turning the
(4)When ribbon is broken during printing
Ribbon may be broken if it is narrow in width and printhead heat temperature is high. In that case, set the mark on the feeding section to SUPER LOW and set the mark on the winding section to LOW by turning the
Note: If the problem is still not resolved, please contact our service personnel.
51
