Chapter 2 Printer Operation

4 Self-Test Mode & Hex Dump Mode

4 Self-Test Mode & Hex Dump Mode

In this mode, self-test printing is performed, and you can check the current printer configuration settings and print quality. After loading the media and ribbon, operate the printer in the following way:

1.Turn ON the power switch while pressing and holding the FEED key.

When labels are used, hold down the FEED key for two seconds and the printer will feed the media and print samples 1 and 2 (see below) and stop.

When continuous media is used, hold down the FEED key for four seconds and the printer will feed the media and print samples 1 and 2 (see below) and stop.

30

Page 31
Image 31
Citizen Systems CLP-7201e user manual Self-Test Mode & Hex Dump Mode