Chapter 1 Setup
2 Part Names and Functions
Side view
(1)
To change the ribbon tension setting on the winding side. (See Chapter 4.)
(2)Rear tension knob
To change the ribbon tension setting on the feeding side. (See Chapter 4.)
Rear view
(1)Serial interface connector
To connect the serial interface cable.
(2)USB interface connector
To connect the USB interface cable.
(3)Parallel interface connector
To connect the parallel interface cable.
(4)Power switch
To turn on or off the power. (See Chapter 2.)
(5)Power inlet
To connect the power cord.
(6)PCMCIA memory card cover
To protect the PCMCIA memory card from exposure to dust and foreign matter. To install a PCMCIA memory card, first unhook this cover, then slide it out. (See Appendixes.)
16
