Chapter 2 Printer Operation
3 Printer Configuration Setting Mode
Notes when setting print start position and media stop position
•When the "AfterPnt" menu item is set to "AutoCut", the relation between print start position and media stop position should be set to [(O ( (f]. If the value is set so that [(O < (f], the media may be out of platen.
•If the absolute value to O value is larger than the absolute value to f value as the set value of [(O] increases, the media stop position may change. However, if the absolute value to f value is smaller than the absolute value to O value as the set value of [(f] decreases, the media stop position may not change.
•When the "AfterPnt" menu item is set to "PeelWait", the set value of [(f] should be limited; the larger value causes labels to unexpectedly peel off.
29
