Chapter 1 Setup
2 Part Names and Functions
2 Part Names and Functions
Front view
(1)Cover
Opens to allow loading of the media and ribbon.
(2)Control panel
To set the printer configuration settings. (See Chapter 2.)
(3)Ribbon holder
To attach the ribbon. (See Chapter 3.)
(4)Ribbon winder
To wind the ribbon after printing. (See Chapter 3.)
(5)Roll holder
Holds the roll of media.
(6)Roll guide
Guides the roll of media. This is adjusted according to the width of the media. (See Chapter 3.)
(7)Media holder
Holds the roll holder. (See Chapter 3.)
(8)Open lever
To swing the printhead out of the way when loading the media or cleaning the printhead. (See Chapter 3.)
(9)Printhead pressure adjustment knob (See Chapter 4.)
(10)Open guide
Holds down the media. The adjustable, movable media sensor inside (available for the model
(11)Open guide lever
Pressing this opens the open guide to replace the media. (See Chapter 3.)
(12)Front sensors
Detect the label or tag position. (See Chapter 3.)
(13)Offset check window
Allows you to check the optimum position of the printhead. (See Chapter 4.)
15
