Compex Systems NetPassage WP18 Access to Web-based Interface, Through the Compex Utility uConfig

Chapter 3 Access to Web-based Interface

3: Access to Web-based Interface

There are two methods to access to the web-based interface of Compex NetPassage WP18:

1.Through the Compex Utility – uConfig

You can access to the web-based interface directly without having to change the IP address of your PC.

2.Through your web browser

First, you will need to assign an IP address to your PC, such as 192.168.168.xxx, where x can be any value from 2 to 254, so that it is in the same subnet as Compex WP18. Then, enter IP address of Compex WP18 in the address bar of Internet Explorer and press Enter.

Access to the Web interface with uConfig

Compex has developed a powerful uConfig utility that provides hassle-free access to the web-based configuration page.

Insert the Product CD into your CD-ROM drive.

From the Utilities section, select to install the uConfig utility to your hard disk.

When the utility has been installed, double-click on the uConfig icon. The following screen will appear, click on the Yes button to proceed.

12