Mocomtech CRS-300 operation manual Select STORE/LD Store or Load Configuration

CRS-300 1:10 Redundancy Switch	Revision 16
Front Panel Operation	MN/CRS300.IOM

7.7SELECT: STORE/LD (Store or Load Configuration)

STORE/LOAD CONFIG:

STORE LOAD (PRESS ENTER)

Select STORE or LOAD using the ◄ ► arrow keys, then to press [ENT]. These submenus permit the User to store or load up to 10 different Switch configurations in its non-volatile memory.

NOTE: These are configurations for the Switch itself, not the modems to which it is attached.

7.7.1 STORE/LD: STORE

STORE CONFIGURATION TO

LOCATION: 10 (ENTER)

Select the location, using the ▲ ▼ arrow keys, to where the current configuration is to be stored, then press [ENT]. Locations 1 through 10 are available. If the selected location does not contain a previously stored configuration, the following display appears:

YOUR CONFIGURATION HAS

BEEN STORED! (ENTER)

Press [ENT] or [CLR] to return to the previous menu. If, however, the selected location contains a previously stored configuration, the following display appears:

WARNING! LOC 10 CONTAINS

DATA! OVERWRITE? NO YES

Select NO or YES using the ◄ ► arrow keys, then to press [ENT]. Selecting YES will overwrite the existing configuration at the selected location.

7.7.2 STORE/LD: LOAD

LOAD CONFIGURATION FROM

LOCATION: 10 (ENTER)

Select the location to load a configuration from, using the ▲ ▼ arrow keys, then to press [ENT]. Locations 1 through 10 are available. If the selected location contains valid data, the following display appears:

THE NEW CONFIGURATION

HAS BEEN LOADED (ENTER)

Press [ENT] or [CLR] to return to the previous menu. If, however, the selected location does not contain valid data, the following screen display appears:

WARNING!	LOC 10 CONTAINS
NO DATA!	(ENTER)

Press [ENT] or [CLR] to return to the previous menu.

7–19