Mocomtech CRS-300 operation manual Tables

CRS-300 1:10 Redundancy Switch		Revision 16
Table of Contents		MN/CRS300.IOM
C.5	Packet Structure	C–3
C.5.1	Start of Packet	C–3
C.5.2	Target Address	C–3
C.5.3	Address Delimiter	C–4
C.5.4	Instruction Code	C–4
C.5.5	Instruction Code Qualifier	C–5
C.5.6	Optional Message Arguments	C–6
C.5.7	End of Packet	C–6
C.6	Remote Commands and Queries	C–6
		Tables
Table 1-1. CRS-300 Compatibility Table		1–4
Table 4-1. CDM-625 Cable Usage (RMI/TMI)		4–24
Table 4-2. CDM-700 Interface Card Combinations		4–50
Table 4-3. CDM-710 Interface Card Combinations		4–60
Table 4-4. CDM-710G Interface Card Combinations		4–66
Table 5-1. RMI JMP1 Factory-configured Jumper Settings		5–10
Table 5-2. CRS-316 Jumper ‘JP1’ Settings		5–12
Table 5-3. CRS-316 Jumper ‘JP2’ Settings		5–12
Table 5-4. CRS-316 Jumper ‘JP3’ through – ‘JP6’ Settings		5–12
Table 5-5. CRS-320/CRS-340 Jumper Settings		5–14
Table 5-6. CRS-336 Jumper ‘JP1’ Settings		5–16
Table 5-7. CRS-336 Jumper ‘JP2’ Settings		5–16
Table 5-8. CRS-370 Jumper Settings		5–17
Table 6-1. 485 Pass-Through User Data Connector		6–2
Table 6-2. Remote Control Connector		6–2
Table 6-3. System Alarms Connector		6–3
Table 6-4. EIA-232/422/V.35 Connector		6–4
Table 6-5. EIA-232/422/V.35/LVDS Connector		6–5
Table 6-6. ASI Connectors		6–6
Table 6-7. 8 kHz – IDR ESC Connector		6–6
Table 6-8. Balanced G.703 Connector		6–7
Table 6-9. Unbalanced G.703 Connectors		6–8
Table 6-10. Unbalanced G.703 Connectors		6–8
Table 6-11. HSSI Connector		6–9
Table 6-12. 10/100/1000 Connector		6–10
Table 6-13. Quad E1 Connector (Typical Ports 1 through 4)		6–11
Table 6-14. Quad E1 Connector (J2)		6–12
Table 6-15. Quad E1 Connector (J3)		6–12
Table 7-1. Unit Status LED Indicators		7–3
Table 7-2. Modem Status LED Indicators		7–4

x