Mocomtech CRS-300 CRS-350 ESC Switch Description, PL/12985-1, CRS-230 System Controller AS/0377

CRS-300 1:10 Redundancy Switch		Revision 16
Introduction		MN/CRS300.IOM
Figure 1-20.	(4X) RJ-45
CRS-365 TMI E1
(1-4 ports)
(PL/12985-1)
FOR USE WITH
CDM-Qx/QxL
ONLY	(4X) RJ-45	HD-15 Female
1.4.5 CRS-300 System Controller and Power Supply Card Assemblies
	DB-9 Female	DB-25 Male

Figure 1-21.

CRS-230

System

Controller

(AS/0377)

DB-9 Male DB-25 Female

Figure 1-22.

CRS-240 AC

Power Supply

(AS/0376)

Figure 1-23.

CRS-250 DC

Power Supply

(PL/10458-1)

1.5CRS-350 ESC Switch Description

The CRS-350 is intended for use with the CDM-600/600L, CDM-625, and SLM-5650/5650A modems. The CRS-350 is constructed as a 3RU-high, rack-mounting chassis designed for mounting to the back of a 19-inch rack. See Figure 2-1in Chapter 2. INSTALLATION for an installation example.

Figure 1-24shows the user interface side of the CRS-350 ESC Switch. Here, the User has access to the Audio, Overhead, and IRD connector interfaces featured on the CRS-355 User Data Interface (UDI).

1–14