Mocomtech operation manual User Data Connections CRS-300 to User

CRS-300 1:10 Redundancy Switch	Revision 16
Cables and Connections	MN/CRS300.IOM

Next, connect and secure the (4X) Quad E1 TMI Data Cables (CEFD P/N PP/CAT5FF7FTGY) as follows:

•RJ-48 connectors labeled “Port 1” through “4” on the TMI(s), to

• RJ-48 connectors labeled	“Port 1” through “Port 4” on the Traffic
CDM-Qx/QxL.

4.6.5User Data Connections – CRS-300 to User

The User’s traffic data from multiplexing equipment or a test data generator should connect to the connectors on the TMI labeled “User Data Interface”. This interface replaces the direct connection to the Traffic Modem’s “Data Interface” connectors.

Because the Redundant Modem’s function is to replace a faulted traffic modem, the RMI does not have a User Data Interface.

Refer to Chapter 1.4.4 Modem Interface Cards for detailed information on the RMI and TMI cards available for use with the CDM-Qx/QxL modems.

4–43