Mocomtech CRS-300 operation manual Select Info Information, Info S/N, Info ID

CRS-300 1:10 Redundancy Switch	Revision 16
Front Panel Operation	MN/CRS300.IOM

•If desired, the User can go to Manual mode, switchover the active traffic from the Redundant Modem onto the Traffic Modem, and then return to Auto mode.

7.5SELECT: INFO (Information)

The INFO: submenus provide information on the current configuration of the Switch without risking inadvertent alterations.

INFO: S/N ID SETUP

IF-SWITCH REMCONT MASK

Select S/N, ID, SETUP, IF-SWITCH, REMCONT or MASK using the ◄ ► arrow keys, then press [ENT].

7.5.1 INFO: S/N

SWITCH ID:

-------------------------

This screen displays the unique serial number assigned to this unit by Comtech EF Data. Press [ENT] or [CLR] to return to the previous menu.

7.5.2 INFO: ID

SWITCH ID:

-------------------------

This screen displays the User-defined Switch ID string, which is entered via the UTILITY: SWITCH-IDsubmenu. Press [ENT] or [CLR] to return to the previous menu.

7.5.3 INFO: SETUP

TM: 1 2 3 4 5 - 7 - 9 10

AUTO:OFF BKUP:05 REST:20

This screen displays some of the settings configured in the CONFIG: OPTIONS menu. Active Traffic Modems are listed on the top line, with Auto mode and the two Holdoff times listed on the bottom.

7.5.4 INFO: IF-SWITCH

TRANSPONDER SWITCH IS

ABSENT

This screen displays whether or not a CRS-280(L) IF Transponder Switch is connected to the CRS-300. When an IF Switch is present, the second line will indicate “PRESENT”, and any offline modem – Redundant or Traffic – will not have its Tx IF muted by the CRS-300.

7–13