CRS-300 1:10 Redundancy Switch

Revision 16

Front Panel Operation

MN/CRS300.IOM

7.8SELECT: UTILITY

UTILITY: SET-RTC DISPLAY

SWITCH-ID TEST RELAY (ENT)

Select SET-RTC, DISPLAY, SWITCH-ID, or TEST RELAY using the ◄ ► arrow keys, then press [ENT]. This submenu permits the User to select from a number of different utility functions, which are described as follows:

7.8.1 UTILITY: SET- RTC (Set Real-Time Clock)

EDIT REAL TIME CLOCK: 12:00:00 24/04/00 (ENT)

Edit the time and date settings of the real-time clock. Select the character to be edited using the

► arrow keys, then change the value of the digit using the ▲ ▼ arrow keys.

Note that in accordance with international convention, the date is shown in DAY/MONTH/YEAR format.

Once the time and date has been edited, the User should press [ENT].

7.8.2 UTILITY: DISPLAY (Display Brightness)

EDIT DISPLAY BRIGHTNESS:

100% (PRESS ENTER)

Brightness levels of 25%, 50%, 75% or 100% are selectable. Edit the display brightness using the ST arrow keys. Once the desired brightness has been set, press [ENT].

7.8.3 UTILITY: SWITCH-ID

EDIT SWITCH ID: (ENTER)

---- THIS IS A TEST ----

Edit the Switch ID string. Only the bottom line (24 characters) is available. Edit the string by selecting the cursor position on the bottom line using the ◄ ► arrow keys, then editing the character in that position using the ST arrow keys.

The following characters are available:

[space] ( ) * + - , . / 0-9 and A-Z Once the Switch ID string has been edited, press [ENT].

7–20

Page 200
Image 200
Mocomtech CRS-300 operation manual Utility SET- RTC Set Real-Time Clock, Utility Display Display Brightness