Mocomtech CRS-300 Hssi Interfaces via the CRS-336 TMI, CRS-336 Hssi or Ethernet TMI Card

CRS-300 1:10 Redundancy Switch	Revision 16
Modem, RMI/TMI, and Switch Configuration	MN/CRS300.IOM

5.4.3HSSI Interfaces via the CRS-336 TMI

Figure 5-8and Figure 5-9depict the CRS-336 TMI (CEFD P/N PL/12499 Rev B or later). Jumpers JP1 & JP2 settings are factory-shipped as indicated. For modem-specific operations, observe the following:

•For CDM-625 modems, the jumper settings for ‘CA to TA’ Loop are as follows: Pin 1 to Pin 3 (JP1 and JP2).

•For SLM-5650A modems,the jumpers settings are as follows: Pin 1 to Pin 2; Pin 3 to Pin 4 (JP1 and JP2).

Jumpers JP1 & JP2: See Figure 5-9,

Tables 5-6 and 5-7 for details

Front view Side View

Figure 5-8. CRS-336 HSSI or Ethernet TMI Card

Figure 5-9. CRS-336 Jumpers JP1 & JP2 Detail (as shipped)

5–15